My Blog

Posts for tag: crown

By New Town Dental Arts
August 10, 2019
Category: Dental Procedures
Tags: crown  
AStainlessSteelCrownCouldExtendtheLifeofaPrimaryMolar

One of the key elements in a child’s development is their first set of teeth. Although primary (“baby”) teeth last only a few years, they’re critically important for enabling a child to eat solid foods, speak and smile.

But they also provide one more important benefit—they hold the space in the jaw reserved for the permanent teeth developing just under the gums until they erupt. But if a child loses a primary tooth prematurely because of disease or injury, other teeth may drift into the vacant space and crowd it out for the intended permanent tooth. It may then come in misaligned or remain stuck within the gums (impaction).

To avoid this, we try to treat and preserve a diseased primary tooth if at all practical. For a primary molar, one of the large teeth in the back of the mouth, this might include capping it with a stainless steel crown.

Why a metal crown? Primary molars normally don’t fall out until around ages 10-12, so it may be years for a younger child before their permanent molars erupt. All during that time these particular teeth will encounter heavier biting forces than teeth in the front.

A steel crown is often the best solution for a molar given their longer lifespans and encountered biting forces. The crown’s metal construction can stand up to these forces while still protecting the tooth from re-infection from decay. And because molars are typically outside of the “smile zone” occupied by more visible front teeth, the crown’s metal appearance isn’t usually an aesthetic issue.

Crowning a molar usually takes one visit, a dentist typically performing the procedure with local anesthesia and possibly a mild sedative like nitrous oxide gas (“laughing gas”). After removing any decayed structure from the tooth, the dentist will then fit a pre-formed crown over the remaining structure, sized and shaped to match the original tooth as close as possible.

A stainless steel crown is a cost-effective way to added needed years to a primary molar that could otherwise be lost prematurely. Preserving it may help a child avoid bite problems and expensive future treatments.

If you would like more information on dental care for primary teeth, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Stainless Steel Crowns for Kids: A Safe and Effective Way to Restore Primary Molars.”

AStainlessSteelCrownCouldHelpaStrugglingPrimaryMolarLastLonger

Although primary (“baby”) teeth have a lifespan of only a few years, they’re still important to a child’s current and future dental health. In the present, they help a child eat, speak and smile properly. They also help create a healthy future as placeholders for developing permanent teeth yet to come in.

If, however, a child loses a primary tooth prematurely due to decay, the corresponding permanent tooth could come in misaligned. That’s why we do what we can to help a decayed primary tooth reach its full lifespan. And there are different ways to do this depending on the type of tooth.

With front teeth, which don’t encounter the same chewing forces as those in the back, we may use a tooth-colored filling. This approach is also preferable for appearance’s sake since front teeth are highly visible when a child speaks or smiles.

Primary molars, on the other hand, need a more robust solution. A filling may not be able to withstand the level of long-term chewing forces that these back teeth normally encounter. And because they’re less visible than front teeth, there’s less concern about aesthetics.

That’s why many pediatric dentists prefer stainless steel crowns for molars. Just like their permanent teeth counterparts, a primary crown fits over and completely covers a tooth. They’re typically pre-formed, coming in different shapes and sizes that can then be customized for the tooth in question. After preparing and removing any decayed material from the tooth, we can usually install the crown in one visit with local anesthesia and a sedative (if the child needs it for anxiety).

While a steel crown isn’t the most attractive restoration, it typically handles the higher chewing forces in the back of the mouth better and longer than a filling. That’s especially critical for primary molars, which are some of the last teeth to fall out (as late as ages 10-12).  And besides preserving it as a permanent tooth placeholder, a crown also helps the tooth function effectively in the present.

Regardless of what method we use, though, preserving primary teeth is a primary goal of pediatric dentistry. And with a stainless steel crown, we can keep those important back molars functioning for as long as they’re intended.

If you would like more information on caring for primary teeth, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Stainless Steel Crowns for Kids.”

By New Town Dental Arts
July 20, 2015
Category: Dental Procedures
Tags: crown  
CustomizedTemporaryCrownsletyouRehearseYourFutureSmile

Modern restorations for severely damaged or missing teeth are truly remarkable. Although the type of restoration may differ — dental implant, bridge, or veneer — the end result is a life-like facsimile that matches the shape and color of your natural teeth.

To achieve this result, though, the new crown or veneer requires fabrication in a dental laboratory, a meticulous process that may take a few weeks. In the interim, we often install temporary crowns. These help in a number of ways: because we’ve prepared the teeth for final restoration by removing some of the tooth structure, the temporary crown protects and stabilizes the teeth, reduces sensitivity and helps maintain gum health. Temporary crowns also enable the patient to present a more natural smile while waiting for the permanent restoration.

Temporary crowns are typically manufactured to fit a wide range of patients, similar to an “off-the-rack” suit from a clothing store. In recent years, though, customized “tailored” temporary crowns designed specifically for an individual patient have grown in popularity among dental professionals as well as patients.

In creating a customized temporary crown, we first perform a smile analysis similar to one used for a permanent restoration. After a careful assessment of your mouth, we would then make recommendations about the elements to include in the temporary crown, including shape and color. We would also factor in your desires and concerns into the final design. Working together with the dental laboratory, we would then have the temporary crowns produced and ready to apply as soon as we complete the preparatory work.

Customized temporary crowns also serve another important purpose as a kind of “dress rehearsal” for the permanent restoration. This gives you an opportunity to “try out” the smile you’ll have with the permanent restoration in your daily life. We can then use your experience to make adjustments to the permanent crowns before final production.

While customized temporary crowns involve more effort and expense than the traditional, the benefits are worth the added cost, especially if you’re involved with an extensive “smile makeover” procedure. Not only will you look better while your permanent restoration is under construction, your temporary look will give you added confidence that your future smile is right for you.

If you would like more information on temporary and permanent dental restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Concepts of Temporary Restorations.”

By New Town Dental Arts
January 23, 2015
Category: Dental Procedures
Tags: crown  
ConsideralltheCostFactorsWhenDecidingonaCrownRestoration

A crown restoration is a fabricated replica of a natural tooth. The mechanics and methods to prepare the tooth and attach the new crown are standard procedures in dentistry. But the crowns themselves — their individual shape, color and material from which they’re constructed — can differ greatly depending on each patient’s individual needs and desires. All these factors can have a bearing on cost — not to mention the process a dentist may employ to produce a custom crown.

Crowns are usually fashioned by a dental laboratory technician using castings of the patient’s mouth prepared by the dentist. These professionals should be considered artists as well as scientists. And, like artists with certain areas of strength and expertise, individual technicians may also develop high practical skill for a particular type of tooth replacement; it’s not uncommon for a dentist to use a different dental technician for a particular type and size of tooth to be restored. This could prove to be a factor in the final cost.

The efforts to create the best color in the crown can also affect cost. While we think of teeth as uniformly “pearly white,” there really are variations and gradations in normal tooth color (even within the same tooth). Again, a bit of artistry is important here, as the dentist communicates with the technician on not only the color but also the subtle hue gradations along the length of the crown. Your input as a patient is also valuable in determining color — you must be satisfied with the final product. Fortunately, it’s now possible to take a “test drive” of your potentially new look with a provisional crown that will allow you to see just how your permanent crown (which will be made of longer-lasting, higher quality materials) will appear.

These factors, as well as the limitations you may face by your insurance coverage, can greatly influence the final cost of treatment. As your dentist, we will consult and work with you to find the best crown restoration option that will fit both your dental needs and your financial ability.

If you would like more information on your options for crowns and other restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Value of Quality Care.”

By New Town Dental Arts
April 09, 2014
Category: Dental Procedures
Tags: crown  
WhatsaCrownWorthAestheticsandValueinToothRestoration

Getting a new crown for a front tooth is a standard procedure performed in thousands of dental offices around the country. But dental patients are sometimes surprised to find that the price of this routine treatment can vary by a substantial amount. What accounts for the difference? The answer tells us a lot about how crowns are made, and the value of aesthetics in dentistry.

Crowns may be made of several different materials. Gold, the most traditional restoration material, makes for a time-tested, functional and durable crown, lasting as long as 50 years. Gold is a precious (and expensive) metal, but considered over the lifetime of the restoration, it's an economical choice. Yet, even for back teeth, it's losing out in popularity to more aesthetically pleasing alternatives.

Porcelain-fused-to-metal (PFM) crowns and all-porcelain crowns replicate the look of natural teeth more accurately. The kind of porcelain used in restorations must have special strengtheners added, which enable it to stand up to wear and tear in the mouth. There are different porcelain materials used in dental restoration, each with a different look, quality and longevity. There are also new, high-tech ceramic materials. Each one has advantages and drawbacks, and each one's cost is different.

Besides the material, another large part of a crown's cost is the custom-fabrication of every piece. Since it must match the other teeth in form and function — and often in looks as well — every crown must be made to an individual's exact requirements. This includes the tooth's exact size and shape, its spacing, and (often) its particular color.

Making this happen is a multi-step process. First, a dentist carefully prepares a model of the affected tooth and its neighbors. Then, the fabrication work is normally performed by a highly skilled laboratory technician, at the dentist's direction. Finally, the dentist prepares the tooth for the restoration, performs final adjustments, and attaches the finished crown. When it's done, the restored tooth can be difficult to tell apart from any other.

The level of craftsmanship involved at the dental laboratory can vary — and along with it, the price. Dentists may even choose different technicians based on the quality level they're striving for. All of these factors affect the final cost of the crown, and its value to the patient.

It has been said that beauty is in the eye of the beholder, and this is certainly true in the case of dental restorations. The choice of a “best” crown is different for every person — more than one alternative may be available, and each comes with its own price. If you have more questions about your options for a crown restoration, don't hesitate to ask us!

If you would like more information about crowns, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine articles “Value of Quality Care,” “Porcelain Crowns & Veneers,” and “Gold or Porcelain Crowns.”